PULSED LASER DRIVER

The GEM-DLS40 has optimized the HV-DC source and trigger circuitry in size and functionality to fit in just 16cm². Its typical application is driving pulsed laser diodes.

GENERAL SPECIFICATIONS

Pulse length control with trigger signal (15ns-1us)

Up to 100kHz pulse repetition frequency

Different input voltage options(12-24V)

Current reading pin

The laser diode can be soldered directly to the pads on the GEM-DLS40.

Along with its small size, theGEM-DLS40 is designed for ease of use.

It eliminates the need for multiple peripheral supply units.

A single dc supply (12-24V) and trigger signal are sufficient for operation.

ELECTRICAL SPECIFICATIONS

Output current: 8-40A(switchable with adjustable resistor)

Max output voltage: 70V

Rise time: ~ 5ns

Trigger delay ~ 30ns

Minimum pulse length: 15ns

Maximum shot length: 1us

Pulse repetition frequency: 1 pulse- 100kHz (maximum pulse length decreases as frequency increases)

Trigger signal: 3,3-5V (50 ohm connection)

Current reading: 20A/V (50 ohm connection)

Supply voltage: 12V-0,2A / 24V-0,1A

ENVIRONMENTAL SPECIFICATIONS

Operating temperature: -35° C /+50° C

Storage temperature: -40° C /

+70° C

PHYSICAL SPECIFICATIONS

Weight: 9g

Size: 33mm x 49mm

GEM-DLS50

PULSED LASER DRIVER

The GEM-DLS50 has optimized the HV-DC source and trigger circuitry in size and functionality to fit in just 37 cm².Its typical application is driving pulsed laser diodes.

GENERAL SPECIFICATIONS

Pulse length control with trigger signal (15ns-1us)

Up to 100kHz pulse repetition frequency

Different input voltage options(12-24V)

Current reading pin

The laser diode can be soldered directly to the pads on the GEM-DLS50.

Along with its small size, theGEM-DLS50 is designed for ease of use.

It eliminates the need for multiple peripheral supply units.

A single dc supply (12-24V) and trigger signal are sufficient for operation.

ELECTRICAL SPECIFICATIONS

Output current: 8-50 A(switchable with adjustable resistor)

Maximum output voltage: 100V

Rise time: ~ 5ns

Trigger delay ~ 30ns

Minimum pulse length: 15 ns

Maximum shot length: 1us

Pulse repetition frequency: 1 pulse- 100kHz (maximum pulse length decreases as frequency increases)

Trigger signal: 3,3-5V (50 ohm connection)

Current reading: 20A/V (50 ohm connection)

Supply voltage: 12V - 0,25 A / 24V- 0,125A

ENVIRONMENTAL SPECIFICATIONS

Operating temperature: -35° C /+50° C

Storage temperature: -40° C /+70° C

PHYSICAL SPECIFICATIONS

Weight 18g

Size: 44mm x 83mm

GEM-DLS70

PULSED LASER DRIVER

The GEM-DLS70 has optimized the HV-DC source and trigger circuitry in size and functionality to fit in just 37 cm².Its typical application is driving pulsed laser diodes.

GENERAL SPECIFICATIONS

Pulse length control with trigger signal (15ns-0,5us)

Up to 100kHz pulse repetition frequency

Different input voltage options(24-36V)

Current reading pin

The laser diode can be soldered directly to the pads on the GEM-DLS70.

Along with its small size, theGEM-DLS70 s designed for ease of use.

It eliminates the need for multiple peripheral supply units.

A single dc supply (24V) and trigger signal are sufficient for operation.

ELECTRICAL SPECIFICATIONS

Output current: 20-70A(switchable with adjustable resistor)

Maximum output voltage: 150V

Rise time ~ 7ns

Trigger delay ~ 40ns

Minimum pulse length: 15ns

Maximum pulse length: 0,5us

Pulse repetition frequency: 1pulse-100kHz (maximum pulse length decreases as frequency increases)

Trigger signal: 3,3-5V (50 ohm connection)

Current reading: 40A/V (50 ohm connection)

Supply voltage: 24V-0,175A / 36V-0,116A

ENVIRONMENTAL SPECIFICATIONS

Operating temperature: -35° C /+50° C

Storage temperature: -40° C /+70° C

PHYSICAL SPECIFICATIONS

Weight 19g

Size: 44mm x 83mm